prince_charming
11-30 01:05 AM
Hi Prince,
Would you please tell me if your status is updated yet? If yes, How long did it take from MTR approval to updated status?
I have an approved MTR but it says that they are going to review my I-140. I have no idea how long will it take. Is there any possibility that the deny I-140 after Approval of MTR(I290B)?
Thanks,
Its been 2 years but my I-485 still shows denied although my MTR got approved and i have renewed 2 EADs and 2 APs etc.
Don't know for sure but i sent a letter to whitehouse and they sent a response couple of months later indicating my case is waiting for VISA number and everything else is alright.
And since my EADs and APs are approved in 2 years i am not that worried about online showing denied.
Would you please tell me if your status is updated yet? If yes, How long did it take from MTR approval to updated status?
I have an approved MTR but it says that they are going to review my I-140. I have no idea how long will it take. Is there any possibility that the deny I-140 after Approval of MTR(I290B)?
Thanks,
Its been 2 years but my I-485 still shows denied although my MTR got approved and i have renewed 2 EADs and 2 APs etc.
Don't know for sure but i sent a letter to whitehouse and they sent a response couple of months later indicating my case is waiting for VISA number and everything else is alright.
And since my EADs and APs are approved in 2 years i am not that worried about online showing denied.
wallpaper *ALBERT EINSTEIN…EMC2 (C
Brasco
January 28th, 2008, 12:51 PM
Shannon
Let me qualify by stating I don't have a D40x. There are a bunch of things you can do, depending on the specific problem. However, if you can set the autofocus points, then set the center point as the default. That way the camera will only focus on what's dead center in the lens.
You also need an aperature that will give enough depth of field. You don't necessarily need the whole shot in focus, just the right part of the shot. The exact aperature is going to depend on the size of lens you use. A telephoto will require a higher aperature than a wide angle lens to get more depth of field. There are DOF charts available on the internet. The aperature you use will also depend on whether you are using a flash. Also, are you sure it's a focus issue and not a motion issue. A bounce flash may not be the best way to stop action of a young'n.
It's really hard to diagnoze without specific examples but maybe this gets you started. I'm sure others will contribute as well.
Let me qualify by stating I don't have a D40x. There are a bunch of things you can do, depending on the specific problem. However, if you can set the autofocus points, then set the center point as the default. That way the camera will only focus on what's dead center in the lens.
You also need an aperature that will give enough depth of field. You don't necessarily need the whole shot in focus, just the right part of the shot. The exact aperature is going to depend on the size of lens you use. A telephoto will require a higher aperature than a wide angle lens to get more depth of field. There are DOF charts available on the internet. The aperature you use will also depend on whether you are using a flash. Also, are you sure it's a focus issue and not a motion issue. A bounce flash may not be the best way to stop action of a young'n.
It's really hard to diagnoze without specific examples but maybe this gets you started. I'm sure others will contribute as well.
simple1
10-02 07:59 PM
stay out. Only insane will do that.
It is illegal
- to bear any expenses while processing h1b/gc.
- to accept job that is not there.
Today is oct2nd. Dont forget gandhi. be a man and have righteousness in heart.
So am still little confused... Should I go this route... The reason is the company who is willing to do my GC is doing also in good faith. But with the economy the way it shapes up... they are not sure, but as a good faith they did agree to start my GC process. Well I will be bearing the lawyer expenses...they would manage the mandatory fees. So they have very little to loose.
What do you guys suggest! I have heard many people who work with company A and GC is done by Company B ... ( Correct me if I am wrong here)
Appreciated
It is illegal
- to bear any expenses while processing h1b/gc.
- to accept job that is not there.
Today is oct2nd. Dont forget gandhi. be a man and have righteousness in heart.
So am still little confused... Should I go this route... The reason is the company who is willing to do my GC is doing also in good faith. But with the economy the way it shapes up... they are not sure, but as a good faith they did agree to start my GC process. Well I will be bearing the lawyer expenses...they would manage the mandatory fees. So they have very little to loose.
What do you guys suggest! I have heard many people who work with company A and GC is done by Company B ... ( Correct me if I am wrong here)
Appreciated
2011 Einstein Emc2
webm
12-15 08:59 PM
They might be sending second FP notice every 15mnths of first/consecutive FP's done once it expires in their system..wait for that notice and dont worry about it now..
more...
modvik
05-25 12:12 AM
Thats a great idea. Could one of the moderators please do this. Raise the urgency on this so that some the dormant ones do it as well.
gc@waiting
09-30 08:58 PM
Does anyone have any idea as to if "YATES MEMO(on being able to use AC21 with a pending 140 for 180 days)" is still relevant or overridden by any subsequent memo/law?
more...
bobmielke
July 6th, 2008, 10:10 AM
I also own a Nikon D40X. I feel you should adjust your aperature for the highest number that will allow a shot. My reason for saying this is that depth of field, the control of areas of sharpness in a photograph, can be easily done by graphic software after the shot is processed. My experience comes from film slr cameras & lots of darkroom time. Since switching to a digital slr I now shoot for everything as sharp as possible & then alter the areas in a photo that I want less sharp later. Saves time & makes for overall sharper images.
2010 Albert Einstein EMC2
MatsP
January 28th, 2008, 02:51 PM
I also don't have a Nikon D40x, but I don't think any of this discussion is related to the specific camera model, although some of my discussion relies on you being able to change settings on the camera, and my names of things may be off from what Nikon uses - hopefully I can still get you on the right track.
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
more...
WillIBLucky
05-30 02:44 PM
I agree this crappy bill better not pass and is worse than retrogression. It is screwing everyone at the cost of giving amnesty to illegals. It is such a joke I would have never imagined that they would have the balls to do this, but I guess they are all politicians!!!
It would take 10 years for Illegals to get citizenship under this bill and get voting rights.
But it looks like the exisiting latino group has promised vote to democratic candidate in 2009 for President. And so this bill is so much for illegals. We educated even if become citizen will take a educated decision on who should we vote. So they are screwing us. Politics!
It would take 10 years for Illegals to get citizenship under this bill and get voting rights.
But it looks like the exisiting latino group has promised vote to democratic candidate in 2009 for President. And so this bill is so much for illegals. We educated even if become citizen will take a educated decision on who should we vote. So they are screwing us. Politics!
hair Einstein#39;s E mc2 Explained.
crazyghoda
10-05 10:42 AM
Its probably a planned leak by the Obama Administration to the press to placate the hispanic lobby. Just chill... nothing's gonna happen.
more...
willwin
07-10 09:21 AM
I got my PWD today!!
Filed on 5th Jan and received today.
Next, the LC waiting period starts!!
My LC was approved on 07/07/2010.
On to I140+485 stage next.
Filed on 5th Jan and received today.
Next, the LC waiting period starts!!
My LC was approved on 07/07/2010.
On to I140+485 stage next.
hot equation E mc2. Einstein
vivache
10-12 12:11 PM
No experience with this.
It will help to know what you can do in this case. I'm sure they have some solution.
It will help to know what you can do in this case. I'm sure they have some solution.
more...
house Einstein#39;s Big Idea: The
fearonlygod
11-13 09:54 PM
thanks guys.....will proceed as suggested..also please advice that wether i need to have exp. letter from that guy.i am not optimistic in getting it....
can the client exp. letter and refernce letters of client project manager work...??
can the client exp. letter and refernce letters of client project manager work...??
tattoo Labels albert einstein, emc2
bluekayal
04-24 01:48 PM
Your posts were always the calm within the storm. Take care and God bless you.
more...
pictures Albert Einstein Emc2 Physical
psaxena
06-29 01:53 PM
What are your skillset.. PM me immeditely that.
I am not a recruiter but got a few contacts and may be of some help.
Hi,
I have been out of client project after May 15th 2009. I work for a major Consulting company and have been on Bench since then. Got laid off on June 22nd 2009 due to lack of work in these tough times. For the past 5 weeks, I have tried to find a project through various job sites and could not succeed to get even one client interview due to various reasons. One major reason being Billing Rate, which was not fine with my previous employer.
I am aware that my current stay is not legal anymore and have to wind up things here and leave US at the earliest. I would be getting my last paycheck till this week(June 26th 2009).
Not sure how much more time it will take for me to get a job. Can anyone advise how long can I stay here to find a project/job(if lucky to get one soon) and be able to transfer my H1 without any issues.
Please advise as I am in dilemma to stay in USA and try for 1 more month or go back to India at the earliest to find a job there, though the situation is bad there too.
I am not a recruiter but got a few contacts and may be of some help.
Hi,
I have been out of client project after May 15th 2009. I work for a major Consulting company and have been on Bench since then. Got laid off on June 22nd 2009 due to lack of work in these tough times. For the past 5 weeks, I have tried to find a project through various job sites and could not succeed to get even one client interview due to various reasons. One major reason being Billing Rate, which was not fine with my previous employer.
I am aware that my current stay is not legal anymore and have to wind up things here and leave US at the earliest. I would be getting my last paycheck till this week(June 26th 2009).
Not sure how much more time it will take for me to get a job. Can anyone advise how long can I stay here to find a project/job(if lucky to get one soon) and be able to transfer my H1 without any issues.
Please advise as I am in dilemma to stay in USA and try for 1 more month or go back to India at the earliest to find a job there, though the situation is bad there too.
dresses Albert Einstein EMC2 Limited
bkn96
12-02 09:01 PM
very encouraging news.. hope USCIS learned leasson..
more...
makeup Einstein with Tagore
shx
07-17 12:13 PM
/\/\/\
\/\/\/
\/\/\/
girlfriend house EMC2: Einstein on
pappu
04-24 03:46 PM
Congrats to everyone getting greencard approvals. The forward movement of dates has helped a lot of our members. let us hope they keep moving the dates forward and do not waste any visas this year.
hairstyles 100 Years of Emc2
hopefulgc
08-17 03:59 PM
isn't the date ... Apr 01 2004 according to sept bulletin
(not jan 1 2004)
If ur EB2 and PD older than Jan 01, 2004 probably you have chance to refile again. During this crunch time don't trust USPS/UPS. Always use fedex...
Hope for the best..
(not jan 1 2004)
If ur EB2 and PD older than Jan 01, 2004 probably you have chance to refile again. During this crunch time don't trust USPS/UPS. Always use fedex...
Hope for the best..
cool_desi_gc
05-30 09:47 AM
I did something different.
In the field "Date of last entry into US", by mistake i put the I-94 validity date. On I-94, there is the date paroled and also the I-94 valid until. By mistake i put in May 2010 instead of May 2009. I did submit the application. When i was sending the supporting documents, i put a cover letter asking them to correct the date. I have to see how they respond. Did anyone actually get this thing corrected. And does these things cause any delays in the processing of the EAD application.
In the field "Date of last entry into US", by mistake i put the I-94 validity date. On I-94, there is the date paroled and also the I-94 valid until. By mistake i put in May 2010 instead of May 2009. I did submit the application. When i was sending the supporting documents, i put a cover letter asking them to correct the date. I have to see how they respond. Did anyone actually get this thing corrected. And does these things cause any delays in the processing of the EAD application.
Openarms
12-05 01:44 PM
Bump
what is this bump means???
what is this bump means???
No comments:
Post a Comment